One of the three ways below:
cat /etc/issue
lsb_release -a
uname -a
Wednesday, December 03, 2008
Safely remove a USB device in Ubuntu.
http://ubuntuforums.org/showthread.php?t=275689
By aysiu
Right-click the drive and unmount it. That's safely removing it.
By aysiu
Right-click the drive and unmount it. That's safely removing it.
P.S. The drive won't disappear from Thunar until you actually physically remove the drive.
Some drives have a light that turns off in Windows but not in Ubuntu. The drive is still safe to remove if it's unmounted. The difference is that Windows unmounts the drive and turns off the power to it. Of course, once you unplug the drive, the power turns off, too.
Some drives have a light that turns off in Windows but not in Ubuntu. The drive is still safe to remove if it's unmounted. The difference is that Windows unmounts the drive and turns off the power to it. Of course, once you unplug the drive, the power turns off, too.
By TiredBird:
I've been using pen-drives, (flash-drives, thumb-drives, whatever), on Windows, Ubuntu and now on Xubuntu. I have learned a few things that might help out.
(1) If the amount of writing to the pen-drive is fairly small, mount it with 'sync' as an option (either in fstab or the mount command). That way each write gets closed out immediately.
(2) If you have a big transfer of data to the usb-pen-drive, take the 'sync' option off at least temporarily or it will take forever to do the writing, (maybe as much as 10 times as long).
(3) Before removing the pen-drive, do a 'sync' from the command line and wait for the command prompt to come back before pulling out the drive. (When I have done a large transfer, like an 'rsync' 300 MB write to the pen-drive, it has taken as much as a minute or two for the system to finish the transfer. In the meantime, the 'sync' command will not give you a new command prompt.
The foregoing is based on experience, not any particular technological knowledge so it may be incorrect. If so, I'm sure one of the experts will correct me.
(1) If the amount of writing to the pen-drive is fairly small, mount it with 'sync' as an option (either in fstab or the mount command). That way each write gets closed out immediately.
(2) If you have a big transfer of data to the usb-pen-drive, take the 'sync' option off at least temporarily or it will take forever to do the writing, (maybe as much as 10 times as long).
(3) Before removing the pen-drive, do a 'sync' from the command line and wait for the command prompt to come back before pulling out the drive. (When I have done a large transfer, like an 'rsync' 300 MB write to the pen-drive, it has taken as much as a minute or two for the system to finish the transfer. In the meantime, the 'sync' command will not give you a new command prompt.
The foregoing is based on experience, not any particular technological knowledge so it may be incorrect. If so, I'm sure one of the experts will correct me.
Subscribe to:
Posts (Atom)